Tree Removal Cost (2026): Prices by Height, Crane Removals and Stump Grinding for Contractors
What a remodeler pays a tree service in 2026: one tree by height, what a crane adds near a house, stump grinding by size, what to write into the scope, power-line and crane rules, permits, insurance, and an addition footprint priced line by line.
The assumptions
This model assumes
- Trees with room to fall unless a crane or rigging is named
- Wood and chips hauled away
- Job cost before markup: subcontract, crane and fees, no tax
- Prices from Clamp's catalog on November 19, 2026
The model, step by step
Priced through Clamp's catalog on November 19, 2026. Every Clamp price in this guide is job cost before markup: what the tree service, crane and fees cost you before your overhead and profit. Ballpark price ranges add your markup to that. Each removal includes chipping the branches, cutting the trunk and hauling the wood and chips away, plus an hour of yard cleanup and supplies. Stumps, cranes and permits are separate lines.
| Height | Clamp job cost |
|---|---|
| Under 30 ftPublished: $150 to $500 | $640 |
| 30 to 60 ftPublished: $300 to $1,200 | $1,540 |
| 60 to 80 ftPublished: $650 to $2,000 | $2,390 |
| Over 80 ftPublished: $1,000 to $2,700 | $3,390 |
A crane earns its cost when the tree leans over a roof, there's no room to drop or lower pieces, or the wood is too decayed to climb. The crew cuts sections and the crane lifts them over the house to a landing spot. Height or distance from the house alone doesn't decide it; the tree service does, after looking at the setup ground and where the pieces can land. Clamp prices a crane day with its operator at $2,800. When the crane does the lowering, the crew isn't also charged for rigging pieces down.
| Method | Job cost |
|---|---|
| 60 to 80 ft, open yardFelled or climbed, room to drop | $2,390 |
| 60 to 80 ft, by the houseClimbed and rigged down in pieces | $3,490 |
| 60 to 80 ft, with a craneCrew plus one crane day | $5,190 |
| Over 80 ft, with a craneCrew plus one crane day | $6,190 |
Stump grinding is priced by the stump's width at the ground, including the root flare, not the trunk higher up. Clamp scales the grinding rate per inch and includes one load to haul the grindings. Grinding goes a few inches below grade and leaves the roots in the ground.
| Stump width | Job cost |
|---|---|
| 12 inOne stump, grindings hauled | $421 |
| 24 inOne stump, grindings hauled | $554 |
| 36 inOne stump, grindings hauled | $688 |
Most disputes on tree jobs come from what the quote left out. Spell each item out.
Put it in writing
MethodFelled, climbed and rigged, bucket truck, or crane, and the limits of work.
Branches and chipsChipped and hauled, or chips left on site.
Trunk woodHauled away, or cut into rounds and stacked for the owner. Hauling billed by the trip runs $75 to $250 per dump trip.
StumpGround how deep, grindings hauled or raked into the hole, and roots left or dug out.
Lawn and driveWho repairs ruts and outrigger marks, and whether the area gets seed or sod.
Permit and utilityWho files and pays the permit, and who calls the utility about the service line.
OSHA has no single tree-care standard. Its 2021 inspection memo applies the general industry rules, including 1910.180 for truck cranes, and the construction crane standard expressly leaves out tree removal. ANSI Z133 is the industry safety standard; the 2026 edition replaced 2017 on May 27, 2026.
What that means on your job
No riding the hookOSHA's memo says the standard prohibits hoisting a person on the crane load or hook.
10 ft from power linesWorkers who aren't qualified for line work stay 10 ft from energized lines at 50 kV or less (1910.333). Closer than that is utility or line-clearance work.
The house service lineSome utilities, Ameren among them, make trees near the line to the house the owner's job and will disconnect service for the work on request. Call before the crew shows up.
LicensesSome states license tree work: Maryland requires a Licensed Tree Expert for tree care for hire, and New Jersey registers tree care businesses.
Tree permits are local, and the fee is often the small part. Clamp carries a $150 permit or review fee per job where one applies; replacement fees and arborist reports are separate.
How different places handle it
Portland, OregonA permit is generally needed for private trees 12 in or more in diameter.
Austin, TexasTrees of 19 in and up are protected; a heritage tree of 24 in and up needs a variance to remove.
Washington, DCRemoving a special tree pays at least $55 per inch of circumference into the Tree Fund. A 30 in oak is about 94 in around, roughly $5,180.
FloridaState law limits local permits for a tree documented by a certified arborist or licensed landscape architect as an unacceptable risk on a home lot.
A limb through the roof, a log on the neighbor's car, or a climber hurt on the job can land on you. Before the tree service starts, get its certificates of general liability and workers' compensation, and call the insurance company to confirm they're active for the job dates.
Check
General liabilityCovers damage to the house and neighbors. Ask whether crane work and any separately hired crane company are covered.
Workers' compensationCovers the tree crew. In many states, if a sub has none, the injured worker's claim can come to your policy.
New Jersey exampleRegistered tree businesses carry $1 million in general liability or a $1 million letter of credit, plus workers' compensation.
A rear addition goes where a 70 ft oak stands, 12 ft from the house, with its canopy over the roof. It comes down in sections with a crane, the wood is hauled away, and its 34 in stump is ground. A 25 ft ornamental in the same footprint is felled normally and its 10 in stump ground. The city requires a permit. No lawn repair, because the excavator digs that ground next. Clamp prices it at $6,469 job cost before markup.
| Line | Job cost |
|---|---|
| Crane and operator, 1 day1 day | $2,800 |
| Oak, 60 to 80 ft, tree crew1 ea | $2,200 |
| Grind both stumps (34 in and 10 in)2 ea | $489 |
| Ornamental, under 30 ft1 ea | $450 |
| Supplies2 ls | $250 |
| City permit1 ea | $150 |
| Yard cleanup, 2 hours2 hr | $130 |

The yard

Every line priced
Left: the yard, drawn for this guide in the style of Quick Clamp's sketch pad, with typed labels (the pad doesn't place trees or cranes). Right: the estimate by trade, $6,469 at job cost. Illustrations of the Clamp app with demo data.
What it means
Every tree, line by line
Clamp reads each tree's height, distance from the house, crane, stump size, haul-off and permit from the words, and prices the tree service, crane day, stump grinding, permit and cleanup on their own lines.
The method decides the price: open drop, rigging, or a crane.
Questions
How much does tree removal cost?
In Clamp's catalog, removing one tree with room to fall runs $640 under 30 ft, $1,540 at 30 to 60 ft, $2,390 at 60 to 80 ft and $3,390 over 80 ft in job cost before markup, wood hauled away. Angi and HomeGuide publish homeowner ranges of about $150 to $2,700 a tree by height.
How much does crane tree removal cost?
Clamp prices a 60 to 80 ft tree by a house with a crane at $5,190 in job cost before markup: the tree crew plus a $2,800 crane day with its operator. Fixr puts crane-assisted removals at $1,500 to $2,500, and one regional tree service rents a 45 ton crane with an operator at $175 an hour with a 4 hour minimum.
How much does stump grinding cost?
Clamp prices one stump with its grindings hauled at $421 for 12 in, $554 for 24 in and $688 for 36 in. HomeGuide gives $120 to $400 for the first stump and $30 to $60 for each extra stump on the same visit.
Do I need a permit to remove a tree?
It depends on the city or county. Portland generally requires one for private trees 12 in or more in diameter, Austin protects trees of 19 in and up, and Washington, DC charges at least $55 per inch of circumference for a special tree. Check the local ordinance before you schedule the work.
Who is responsible for trees near power lines?
Workers who aren't qualified for line work must stay 10 ft from energized lines at 50 kV or less under OSHA 1910.333, so that work goes to the utility or a line-clearance crew. Some utilities make trees near the service line to the house the owner's responsibility and will disconnect service for the tree work on request.
Sources & provenance
- Clamp's catalog, priced by script Clamp (research)
- How much does tree removal cost? Angi (research)
- Tree removal cost HomeGuide (research)
- Tree removal cost Fixr (research)
- Division 3 tree removal state bid tabs, D3POC0246 North Carolina DOT (official source)
- Crane rates Sussex Tree (Delaware and Maryland) (research)
- Inspection guidance for tree care and tree removal operations OSHA (official source)
- 1926.1400 Scope (cranes and derricks in construction) OSHA (official source)
- 1910.333 Selection and use of work practices OSHA (official source)
- ANSI Z133-2026 International Society of Arboriculture (official source)
- Trees & your service Ameren Missouri (official source)
- Do I need a permit to remove trees on private property? City of Portland (official source)
- Tree reviews and permitting City of Austin (official source)
- D.C. Code 8-651.04, preservation of special trees Council of the District of Columbia (official source)
- Florida Statutes 163.045 Florida Legislature (official source)
- Information for businesses New Jersey Board of Tree Experts (official source)
- Licensed tree experts Maryland Department of Natural Resources (official source)
- Why hire an arborist? International Society of Arboriculture (official source)
- Significant changes to the IRC, R403.1 International Code Council (official source)